Answer:
For
a solution for your version of Word, click on the appropriate
link below:
Note: If you have EndNote X or earlier, or any Mac version, these steps will not work. For these versions, see the steps Here.
Important Note: This FAQ is intended to install the EndNote CWYW tools. If you had the tools and they have disappeared, please see this FAQ.
Word 2000/XP/2003
EndNote X2/X3/X4
The simplest way to get the tools to appear in Word 2000/XP/2003 is to run the "Repair" function by selecting EndNote X2 and later in the "Add/Remove Programs" ("Programs and Features" in Windows 7 and Vista) in the Windows Control Panel.
Choose "Change" then select "Repair".
Click Next on each of these screens until the process finishes. Quit and restart all Office applications and check for the tools in Word.
EndNote X1
The simplest way to get the tools to appear in Word 2000/XP/2003 is to run the Configure
EndNote Utility from the EndNote Start Menu or the EndNote X1 Program Files folder. Once you run the utility, make sure "Configure EndNote components for me" is selected and click Next.
Select the "Unified Cite While you Write for the Microsoft Word" option and click Next. Click Finish when you are done. Quit and restart all Office applications and check for the tools in Word.
Note:If you have updated to Endnote X1.0.1 or later, The simplest way to get the tools to appear in Word 2000/XP/2003 is to run the "Repair" function by selecting EndNote X1 in the "Add/Remove Programs" ("Programs and Features" in Windows 7 and Vista) in the Windows Control Panel.
Choose "Change" then select "Repair".
Click Next on each of these screens until the process finishes. Quit and restart all Office applications and check for the tools in Word.
EndNote X1/X2/X3/X4
As an alternate method to installing the tools, you can do the following:
- Open a command line.
XP or 2000: Go to the start menu, choose "Run" and type:
CMD
Click OK.
Windows 7 or Vista: Go to the start menu. In the search box here, type:
CMD
Hold down SHIFT and CTRL and hit the Enter Key.
You will be prompted to approve the "Windows Command Processor."
Choose "Continue"
-
At the prompt, do the following:
For EndNote X1 type:
CD "C:\Program Files\Common Files\Thomson ResearchSoft\Cwyw"
For EndNote X2 type:
CD "C:\Program Files\Common Files\ResearchSoft\Cwyw\12"
For EndNote X3 type:
CD "C:\Program Files\Common Files\ResearchSoft\Cwyw\13"
For EndNote X4 type:
CD "C:\Program Files\Common Files\ResearchSoft\Cwyw\14"
Note that if you have common files installed in a different location, you would need to find this CWYW folder in that other location.
-
From this folder, run the command:
regsvr32 "EndNote Cwyw.dll"
Word 2007
EndNote X2/X3/X4
The simplest way to get the tools to appear in Word 2007 is to run the "Repair" function by selecting EndNote X2 or later in the "Add/Remove Programs"
("Programs and Features" in Windows 7 and Vista) in the Windows Control Panel.
Choose "Change" then select "Repair".
Click Next on each of these screens until the process finishes. Quit and restart all Office applications and check for the tools in Word.
EndNote X1
The simplest way to get the tools to appear in Word 2007 is to run the Configure
EndNote Utility from the EndNote Start Menu or the EndNote X1 Program Files folder. Once you run the utility, make sure "Configure EndNote components for me" is selected and click Next.
Select the "Unified Cite While you Write for the Microsoft Word" option and click Next. Click Finish when you are done. Quit and restart all Office applications and check for the tools in Word.
Note:If you have updated to Endnote X1.0.1, The simplest way to get the tools to appear in Word 2007 is to run the "Repair" function by selecting EndNote X1 in the "Add/Remove Programs" ("Programs and Features" in Windows 7 and Vista) in the Windows Control Panel.
Choose "Change" then select "Repair".
Click Next on each of these screens until the process finishes. Quit and restart all Office applications and check for the tools in Word.
EndNote X1/X2/X3/X4
As an alternate method to installing the tools, you can do the following:
- Open a command line.
XP or 2000: Go to the start menu, choose "Run" and type:
CMD
Click OK.
Windows 7 or Vista: Go to the start menu. In the search box here, type:
CMD
Hold down SHIFT and CTRL and hit the Enter Key.
You will be prompted to approve the "Windows Command Processor."
Choose "Continue"
-
At the prompt, do the following:
For EndNote X1 type:
CD "C:\Program Files\Common Files\Thomson ResearchSoft\Cwyw"
For EndNote X2 type:
CD "C:\Program Files\Common Files\ResearchSoft\Cwyw\12"
For EndNote X3 type:
CD "C:\Program Files\Common Files\ResearchSoft\Cwyw\13"
For EndNote X4 type:
CD "C:\Program Files\Common Files\ResearchSoft\Cwyw\14"
Note that if you have common files installed in a different location, you would need to find this CWYW folder in that other location.
-
From this folder, run the command:
regsvr32 "EndNote Cwyw.dll"
Word 2010 (32 bit only)
EndNote X4
The simplest way to get the tools to appear in Word 2007 is to run the "Repair" function by selecting EndNote X4 in the "Add/Remove Programs"
("Programs and Features" in Windows 7 and Vista) in the Windows Control Panel.
Choose "Change" then select "Repair".
Click Next on each of these screens until the process finishes. Quit and restart all Office applications and check for the tools in Word.
EndNote X4
As an alternate method to installing the tools, you can do the following:
- Open a command line.
XP: Go to the start menu, choose "Run" and type:
CMD
Click OK.
Windows 7 or Vista: Go to the start menu. In the search box here, type:
CMD
Hold down SHIFT and CTRL and hit the Enter Key.
You will be prompted to approve the "Windows Command Processor."
Choose "Continue"
-
At the prompt, do the following:
For EndNote X4 type:
CD "C:\Program Files\Common Files\ResearchSoft\Cwyw\14"
Note that if you have common files installed in a different location, you would need to find this CWYW folder in that other location.
-
From this folder, run the command:
regsvr32 "EndNote Cwyw.dll"
|
